Skip to Content

3M Night Vision 25 Window Film

Made of carbon fiber polyester, patented Night Vision technology offers better sight at night with a unique combination of low reflectivity and high performance. Night Vision window films help block the sun's damaging UV rays, reduce glare and reject up to 71% of the sun's heat. These darker shaded films are designed to reject solar heat that is produced from visible light, and at the same time provide significant glare relief.

Night Vision films allow 15% to 35% of the natural light into your rooms by day, and thanks to low interior reflectivity, you can still enjoy your view at night. Higher exterior reflectivity also means you can enjoy enhanced privacy with your windows both day and night. Night Vision 25 is the most popular of the Night Vision films, due to the increased amount of light transmitted. This is the second darkest version with 25% visible light transmission.

 

Residential Limited Lifetime Quality Promise 

Interior Film Types: Prestige Series, Night Vision Series, Ceramic Series, Traditional Series, Safety & Security Films. Others: _______________ 
Exception LE films – 10 Years 
 
3M™ and the 3M Authorized Dealer/Applicator (collectively referred to as “Seller”) warrant that for as long as the original consumer of the 3M Sun Control or Safety and Security Window Film owns and lives in the home, 3M Window Films will: 
  • Maintain Solar Reflective Properties without cracking, crazing or peeling. 
  • Maintain Adhesion Properties without blistering or delaminating from the glass. 
  • Maintain Appearance without discolouration. 
In the event the product is claimed to be defective under this warranty, the consumer will contact their authorized Dealer/Applicator, provide a copy of this warranty and arrange a convenient time for the authorized Dealer/Applicator to inspect the windows. 
 
In the event the product is determined to be defective under this warranty, the Seller will: 
 
  • Replace the Quantity of Film proved to be defective. 
  • Provide Removal and Reapplication Labour Free Of Charge. 
 
This warranty is provided only to the original purchaser and is not transferable. 
 
Seller also warrants against glass failure due to THERMAL SHOCK fracture for five (5) years and SEAL FAILURE for three (3) years (to a maximum of $500 per window including material and labour) caused only as a direct result of the application of 3M Sun Control and/or Safety and Security Window Films, providing the film was applied to recommended types of glass and the glass failure is reported to the Seller within the specified time of five (5) years for THERMAL SHOCK fracture and three (3) years for SEAL FAILURE from the date the warranty was issued. In order to obtain the SEAL FAILURE portion of this warranty, the consumer must provide the Seller with proof of the original window manufacturer’s Seal Failure warranty. 
 
The SEAL FAILURE portion of this warranty will UNDER NO CIRCUMSTANCES extend beyond the original window manufacturer's Seal Failure warranty period. ANY GLASS FAILURE COVERED BY THIS WARRANTY MUST BE INSPECTED BY SELLER PRIOR TO REPAIR, AND ONLY COVERS FILM AND GLASS REPLACEMENT. 
 
This warranty is void if the product has been subjected to abuse or improper care. Seller should not be liable in either tort or contract for any loss or damage, direct, indirect, special, consequential, or incidental, arising out of the use or inability to use this product. Some Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM PROVINCE TO PROVINCE. 
 
This warranty covers Canadian installations by authorized Dealer/Applicators only. 
Important Notice: Window Care 
 
3M Window Films may be washed with common washing solutions, including ammonia based products, THIRTY (30) DAYS AFTER INSTALLATION (allow an additional 15-30 days for thicker security films). Abrasive type cleaning agents and bristle brushes that may scratch the film must not be used. Synthetic sponges, squeegees or soft cloths are recommended to be used with cleaning solutions. To maintain your warranty, do not use tape or other adhesive products on the film. 
 
Allow air flow between window covering and glass for best performance. 
urban-window-films Contact Us

Urban Window Films

PO Box 21027 RPO Orchard Park
Kelowna, BC

250-869-0123

office@urbanwindowfilms.ca

Contact Us

Window Film Canada
(Head Office)

10 Butterick Road
Toronto, Ontario

Toll Free: 1-888-267-3206

info@windowfilmcanada.ca

Back to top